La nouvelle surface de contrôle L-12 de Wheatstone très élégante possède les mêmes innovations que sa grande sœur la LX-24 et s’adapte parfaitement pour tout type de stations de radio.
Caractéristiques principales :
• Chaque fader donne accès à 4 bus, 1 bus stéréo, et son propre
• Visualisation des sources grâce à un écran LED
• Sélecteur de source A/B
• Un bouton SET permet l’accès à différents contrôles dans la section Master
• La configuration de la L-12 peut se sauvegarder et se rappeler
• Les vumètres à éclairage LED de très haute résolution
• Sorties Control Room et casque avec contrôle de niveau.
• Modules faders remplaçables « à chaud »
The LX-24 is an all-new compact, table-top, modular control surface designed from the ground up to operate with WheatNet-IP. Its new look and impressive array of features, including a built-in high resolution meter bridge, make this control surface a great fit in any control room.
Low-profile design and a table-top form factor allow the LX-24 to fit into almost any studio situation, requiring no holes or cut-outs in the furniture. The meter bridge features three sets of bright, ultra-high resolution LED meters, as well as LED talkbacks for auxiliary levels and pan control. A digital clock/timer is also included.
Each fader provides access to four stereo busses, plus four pre-fader aux sends, a stereo CUE bus, and four mix-minuses. An LED source name display, an A/B source selector, and two programmable soft buttons are also available, and a SET button provides access to assignable controls in the master section.
Control room and headphone outputs with level control and source selection are provided, as well as two independent studio monitor outputs. Stereo CUE speakers are built into the meter bridge.
On-board VGA and USB connectors allow a monitor and mouse to be connected to the console for configuration ; they are not required during normal operations. Snapshots of the LX-24’s configuration can be saved and recalled at the touch of a button, making setup for different shows or dayparts a snap.
The LX-24 is designed for use with Wheatstone’s WheatNet-IP Intelligent Network. An IP-88e Mix Engine BLADE provides the audio mix functionality ; additional BLADEs can be added for inputs and outputs in a variety of digital and analog formats. This I/O can be shared with other consoles and devices throughout the Intelligent Network.
■Low-profile, table-top form factor allows clear sight lines and requires no furniture cutouts
■Four sets of high-resolution LED meters (one switched)
■Four stereo busses
■Four pre-fader aux sends with master level controls
■LED talkbacks for aux send levels and PAN setting
■Stereo CUE bus with built-in stereo CUE speakers and class D amplifier
■Built-in class D headphone amplifier and level control
■Two independent studio monitor outputs
■VGA and USB connectors for configuration and setup
■Two programmable buttons per fader
■12 programmable buttons in the master section
■Event storage and recall allow reconfiguring the console instantly
IP-16 - AUDIOARTS
IP-16 (and IP-12) are Audioarts’ WheatNet-IP compatible control surfaces. Both modular consoles operate exactly as you’d expect a radio console to operate with the added benefit of being able to access the WheatNet-IP AoIP intelligent network. This allows you to access sources wherever they live on your network.
The IP-16 is a 16-fader control surface that taps into the power of the WheatNet-IP Intelligent Network through its IP88CB console audio BLADE engine to make a perfect low-cost, small-footprint solution for any studio. Each of its 16 input modules is equipped with an LED source name display and an A/B source selector ; sources can be set via a rotary encoder in the master section. Each input module has access to four program busses and has cue and talkback switches. A 100mm long-throw fader and lighted channel ON/OFF switches round out the module.
The IP-16 control surface connects via Ethernet to its audio engine, the Wheatstone WheatNet-IP ip88cb console audio BLADE. A powerful 1RU device containing the console’s digital signal processing, input, output, and logic circuitry, the engine has no fans and may be located either next to the console or at a remote location.The master section offers control room, studio, and headphone controls with source selection, and an onboard headphone jack and amplifier. Timer controls, a master talkback button, and a built-in cue speaker with volume control are provided. There are four event switches and six programmable buttons available for user functions. The meter bridge has three stereo pairs of bright 30-segment horizontal LED bargraph meters, as well as an onboard timer with controls located in the master section.
◾16-fader compact control surface
◾4 stereo program busses
◾LED source name displays
◾A/B source selector on each channel strip
◾Guarded channel ON/OFF switches
◾Control room and studio monitor outputs with independent level controls
◾Headphone output with built-in amplifier and level control
◾CUE bus with built-in amplifier and speaker
◾Three pairs of bright, 30-segment bargraph meters
◾Four event switches
◾Six programmable buttons
◾Individual channel talkback with master talkback
◾Bus-Minus on all channels for telco or remote feeds
◾Uses the IP88CB Console Audio BLADE, WheatNet-IP compatible
◾Modular control surface design
◾Integrated I/O Mix Engine Blade
◾2 mic preamps with phantom power and gain trim w/ XLR inputs
◾4 stereo (8 mono) analog line inputs on RJ45
◾4 AES inputs on RJ45
◾4 stereo (8 mono) analog line outs on RJ45
◾4 AES outputs on RJ45
◾Cue and headphone outputs on RJ45 and 1/4” jack
◾Control room and studio monitor outputs on XLRs
◾12 programmable logic ports
◾1 RU enclosure
◾Front panel metering for all busses and outputs
◾100 megabit Ethernet port for connection to network, also carries cue and headphone audio back to the control surface.
- Finally, a small IP control surface that fits your style, your workflow, even your most cramped news booth or voicetracking room. The E-1 control surface for our WheatNet-IP network has everything any large-scale console has but in half the footprint and cost. Available in a variety of fader configurations as a standalone or networked control surface.
The E-1 offers incredible mix-minus flexibility, with a mix-minus output from every input channel that can use any console bus as its reference mix. Each channel also has direct to source talkback and auto-switching between on-air and offline mix-minus.Its 99 show presets, programmable soft switches, router based source and monitor control, and multiple frame sizes all make the E-1 an ideal addition for any studio size and use.
Whether you need to outfit one control room or several, using minimum space and adhering to a tight budget, the E-1 is for you. With its small footprint, built-in touch pad, and full feature set, the E-1 puts the power of a much larger console into a size appropriate for even the most cramped news booth or voice tracking room.
Comfortable as a standalone workstation (when used with an IP88CBE) or as a part of the WheatNet-IP network along side our E-6, E-4 and Sideboard, the E-1 is ready for the future. The compact E-1 Control Surface Console and included IP88CBE Console Audio BLADE provide all the networked control, mixing, I/O and DSP needed for small to mid-sized studios at a price comparable to similar sized standalone analog consoles.
The E-1 features an integrated LCD Monitor for metering and control, a streamlined user interface with password-protected access to complex functions via LCD display and touchpad, and four main mix busses as well as control room and studio monitor outputs with selectable sources from the audio network. Complex mix-minus setups are made simple thanks to per channel mix-minus outputs with selectable reference mix and talkback interrupt.
◾Digital control surface in compact frame
◾Integrated LCD monitor for metering and control
◾Monitor/channel display area is angled for better ergonomics and display view
Power up ! This compact control surface for our WheatNet-IP or BRIDGE TDM network has a lot of horsepower for demanding on-air or production studios. The E-6 has more faders, more source assignments, more mix-minus capability than you’ll ever need.
E-Series E-6 is a console control surface that interfaces with Wheatstone’s WheatNet-IP networking and routing system via a single CAT6 cable. No audio is routed or mixed in the surface itself. As a networked system, the console can access any source in your entire complex, sharing remote codecs or bringing up another studio’s program bus on the console.
A user-supplied high-resolution graphic display monitor can provide vivid VU and peak level indication, as well as in-depth control and programming of the console.
The E-6, the top of the line Wheatstone control surface, provides power and functionality for any radio on-air or production requirement, whether fast-action news, talk, and network origination, or major market music. The E-6 is also designed from the ground up for mixing surround sound for radio (or even TV). Its master panel provides comprehensive control of module functionality as well as monitoring and talkback for two studios. A popular feature is Vorsis-quality EQ, filtering, and dynamics processing on every fader !
The E-6 is also ideal for smaller market facilities, news and voice tracking booths, production rooms where the primary focus is on the digital workstation, and even major-market strictly-music operations.The E-6 surface provides extensive functionality for telephone talk and news formats, with four console-wide mix-minus busses as well as a dedicated mix-minus output from each channel with a talkback button right above the fader. E-6 surfaces can be intermixed with all other surfaces in the same system, such as our LX-24, L-8, E-1, Sideboard or our Talent Stations. All surfaces include event save and recall. Set events for the morning show, normal programming, special events, remotes, weekly shows, whatever you desire. Easily recall the event to completely reconfigure the console : sources, bus assignments, and settings. Set levels of access so that the more experienced operators can accomplish even the most complex tasks, while keeping the part-time weekend op out of trouble.
The E-6 control surface embodies a robust feature set for complex on-air or production application to bring maximum control to minimum space with exceptionally intuitive operation. A touchpad and VGA monitor allow you complete access to an incredibly rich range of features.
In addition to standard features such as 4 stereo mix buses, 4 mix-minus buses, 4 AUX buses and 8 character fader displays, the E-6 offers bus-minus on all faders with talkback, optional EQ/Dynamics on every channel (and with user recall for talent EQ settings), split headphone feed,100 presets and user login with privilege settings. The E-6 meter bridge uses a standard VGA monitor, which also displays surface information such as EQ/Dynamics, panning information and AUX bus settings. The E-6 control surface is equipped for both on-air and production studios and is available in 4, 8 or 12, 16, 20 or 24 fader configurations.
◾Touchpad for control of functions on the VGA monitor
◾Dynamics, EQ, high- and low-pass filtering on every fader
◾No running PC required
◾4 mix output busses
◾4 mix-minus busses
◾Individual fader mix-minus w/ talkback
◾MXM assignment functions effectively follow the source
◾4 AUX sends with individual & master level control
◾Optional master fader panel available
◾Embedded CPU / FTP for increased reliability
◾User privilege w/ passwords
◾Fader source visibility control
◾8 character source fader displays
◾Four AUX output busses
◾Control of source select, pan, mix-minus assign, and AUX 1-4 send level from the master panel – accessed by the SET switch on each input channel strip
◾Two programmable buttons per input channel strip — use for source select or mode change
◾Mode display on each input channel strip – stereo, left, right, mono, 5.1
◾Control Room, Headphone, Studio 1 and Studio 2 monitoring controls
◾14 general-purpose programmable buttons
◾Surfaces from 4 to 24 input faders
◾Graphic VGA display with comprehensive metering, clock and timer, less frequently accessed control functions, and for console programming
◾LED display of active source on every input channel strip
◾Four program busses
◾Four assignable global mix-minus busses
◾Individual channel mix-minus outputs
◾Talkback to mix-minus button on every channel strip
◾SET switch to access secondary functions such as source selection, mix-minus assign, panning
◾EVENT console snapshot recall and save from the front panel
◾Passcode-protected access for four levels : Intern, Operator, Production, and Engineering
◾Front-panel timer control
◾Low-profile design drops into a countertop cutout – about 2″/4cm above counter top and 3″/8cm below
◾Optional Wheatstone GLASS-E software to control the console from a remote PC
◾External rack-mounted power supply ; add a second for redundancy
◾Failover local operation (optional)
◾Standalone or networked operation
◾4, 8, 12, 16, 20 & 24 fader frames
◾Works with the WheatNet-IP Intelligent Network
La nouvelle console réseau Audioarts D-76 possède toutes les caractéristiques de la D-75, qui est un standard aux Etats-Unis depuis 15 ans, à laquelle ont été rajoutées des connections RJ pour les entrées/sorties. Elle est disponible en version 12 ou 16 faders et peut être commandée avec un module réseau afin de la connecter au réseau WheatNet-IP.
The new D-76 is a tabletop, modular console available in a 12-channel or 18-channel frame like its predecessor, the popular D-75, but includes StudioHub+ RJ 45 connectivity and can be ordered with optional IP-76 plug-in module for interfacing to the WheatNet-IP Intelligent Network.
Sporting a sleek new profile, the new D-76 comes standard with sample rate conversion, ample mic preamps, and plenty of stereo busses, caller capability and a comprehensive monitor section that provides separate feeds to control room/headphone and studio monitor outputs — plus headphone jack and built-in cue speaker.
It has four stereo busses, dual-domain outputs, sample rate conversion on all digital inputs, and interchangeable input module daughter cards for easy analog-to-digital conversion in the field. Its modern design features backlit controls and meter bridge with full-scale, bargraph digital peak plus VU metering and automatic timer and clock.
Individual plug-in modules make D-76 installation and service a breeze. The D-76 also can be ordered with an optional SUPERPHONE module, which supports two callers, as well as optional IP-76 card for interfacing to the WheatNet-IP network.
This new console has everything that the industry has come to expect of an Audioarts console — like rock solid reliability and ease of use —but is laid out in a sleek new design that is both affordable and practical for the modern radio station.
>> DISPONIBLE ETE 2015
About the IP-76 Network Module
The optional IP-76 module can be added to the D-76 for interface to any WheatNet-IP system. (A similar module, the IP-75, can be added to existing D-75 consoles for the same purpose.) This plug-in module is easy to add and set up, with color OLED display for setting I/Os and other network parameters from the console surface.
WheatNet-IP is Wheatstone’s popular audio-over-IP network system featuring Gigabit Ethernet throughput and logic control integrated with audio routing, providing operators with instant access to not only I/O, but the logic commands that go with I/O devices and audio. With the IP-76 module, the D-76 console can effectively become a network console for access to and sharing of all resources on the network. This module provides six outputs from the WheatNet-IP audio network that can be effortlessly patched to any input module configured for a digital input and provides two AES inputs to the WheatNet-IP network. Further, the IP-76 (or IP-75) will pick up the four main busses and caller return feeds from the console and add those as sources to the WheatNet-IP audio network for routing.
◾Modular hot-swap plug-in design
◾Optional IP-76 module provides connectivity and additional I/O through WheatNet-IP network
◾StudioHub+ RJ 45 connectivity
◾Inputs can be analog or digital, depending on daughter card installed
◾Any combination of analog and digital line inputs
◾Input channel A/B source select
◾External rackmount power supply
◾Universal opto-isolated mic and line control ports on all input modules
◾Sample rate conversion on all digital inputs
◾Optional dual failsafe power supply
◾Digital clock (can be slaved to ESE time code)
◾Cue function and auto-dropout Connectorized faders and monitor pots
◾Connectorized channel ON/OFF switches
◾CR and studio outputs with separate four-bus source selection plus independent external 1 & 2
◾Both program and switched VU meter pairs
◾Four microphone preamps, standard, with option for four additional
◾Digital timer with autostart and manual control
◾Two on-air tally relays
◾Built-in headphone amp with concealed output jack
◾Built-in cue speaker with amplifier and external cue output
◾Direct digital VU-plus-peak LED metering displays
◾44.1 or 48kHz native digital clock rates
◾Optional phone module with dual caller support